WWHF Deadwood 2026
Hands-On Labs
Eight labs where you put down the slides and pick up the tools: radios, RFID badges, wireless keyboards, CAN bus, and full Active Directory environments built to be broken.
8
Hands-on labs
Across three tracks4
Wireless & radio
SDR, Wi-Fi, BLE, and keystroke injection2
Physical & hardware
Access control and CAN bus2
Active Directory
ADCS, NTLM relay, and SCCM
Track 1 · 4 labs
Wireless & Radio
Capture, analyze, and replay the signals all around you, from doorbells and keyboards to Wi-Fi and Bluetooth.
Doorbell Replay Attack Lab
This lab includes an introduction to software defined radio (SDR) recording and playback for static code devices. Steps include identifying signal characteristics, waveform analysis, static code analysis/regeneration, and signal replay. Attendees will be able to perform a replay attack against a wireless doorbell.
Covers: SDR · waveform analysis · replay attacks
WifiForge: Emulated Wireless Hacking Environments
WifiForge is a Wi-Fi security training tool developed by Black Hills InfoSec that provides a safe and legal environment for learning Wi-Fi hacking techniques. Based on the open source mininet-wifi framework, WifiForge automatically sets up virtual networks needed to run Wi-Fi exploitation labs without physical hardware.
Covers: Wi-Fi exploitation · mininet-wifi · no hardware needed
Bluetooth Low Energy (BLE)
This lab provides an introduction to the Bluetooth Low Energy (BLE) protocol. Participants will gain familiarization with various software tools used to interact with devices supporting the BLE protocol. Those tools will be used to interact with services exposed through BLE to retrieve information from the target device.
Covers: BLE protocol · service enumeration
Keystroke Injections Lab
This lab includes concepts of hijacking a wireless mouse or keyboard and performing keystroke injection attacks. Several wireless input devices are found to still be vulnerable to this type of attack. Attendees will be able to understand and demonstrate how this attack is performed.
Covers: wireless mice & keyboards · keystroke injection
Track 2 · 2 labs
Physical Access & Hardware
Clone badges, open doors, and talk directly to vehicle networks.
Electronic Access Control Lab
This lab introduces participants to some of the common pitfalls associated with electronic access control systems. In the lab, participants will gain familiarity with low and high-frequency RFID cards. Then step-by-step instructions are provided for performing replay, card cloning, and brute force attacks against the targeted system. In addition, participants will explore reader implant devices that exploit cleartext communication between the reader and controller. Finally, participants will explore operation of doors remotely with direct access to the controller.
Covers: RFID · card cloning · reader implants · door controllers
CAN Bus Hands-On Lab
Ever wanted to get your hands dirty with the CAN bus protocol? Well now you can learn a little bit about this protocol which has zero built-in authentication. In this optional hands-on lab, you’ll observe CAN traffic, capture and replay frames, and inject a packet to see exactly how the target device responds. No background required, just bring your curiosity and maybe you will learn something.
Covers: CAN traffic capture · frame replay · packet injection
Track 3 · 2 labs
Active Directory
Two deliberately vulnerable enterprise environments, from first recon to full compromise.
Active Directory Exploitation Lab 1: ADCS and NTLM Relay
The Active Directory Exploitation Lab 1 features a vulnerable Active Directory domain with AD Certificate Services (ADCS), allowing participants to perform reconnaissance on domain structures, users, and ADCS certificate templates using tools like BloodHound and Certipy. Trainees then conduct password spraying attacks to test weak credentials across multiple accounts and domains. The environment supports LLMNR poisoning with Responder to capture NTLM hashes, followed by NTLM relay attacks over SMB for unauthorized access and code execution. Finally, participants exploit misconfigured ADCS templates for privilege escalation and target MSSQL servers to extract data or enable lateral movement through techniques like xp_cmdshell.
Tools: BloodHound · Certipy · Responder
Active Directory Exploitation Lab 2: SCCM
The Active Directory Exploitation Lab 2 SCCM features a vulnerable Microsoft Endpoint Configuration Manager (SCCM) environment, enabling participants to perform reconnaissance by enumerating site servers, management points, and distribution points using tools like SharpSCCM and Sccmhunter. Trainees then abuse PXE boot processes on distribution points to extract credentials from task sequences or collection variables, often leveraging tools like PXEThief when passwords are weak or absent. The setup supports coercing NTLM authentication from the site server machine account, relaying it to the MSSQL database server to execute queries granting full SCCM administrator privileges. Finally, with escalated SCCM admin access, participants abuse client push mechanisms and deploy applications/scripts to achieve lateral movement and remote code execution on managed clients.
Tools: SharpSCCM · Sccmhunter · PXEThief
Next stop: Denver
Want More Hands-On Time?
WWHF Mile High 2027 runs February 16–19 at the Sheraton Denver Downtown, with Antisyphon pre-conference training followed by a live and virtual conference.